Free guide · fusing gold leaf to silver
Keum-Boo is a traditional Korean technique where a thin layer of gold is fused to the surface of silver using heat and pressure. Unlike soldering, you don't need solder or flux. The gold doesn't melt onto the silver. Instead, the two metals form a bond through a process called diffusion bonding.
It's a great way to add gold details to your silver jewelry without having to make the entire piece from gold. You can create small accents, patterns or larger areas of gold, using relatively simple tools.
In this guide, I'll show you what materials you need, how to prepare your silver and how to get started.
Of course you'll need some gold leaf for this technique. I bought 23 karat gold leaf at a painter’s supply store. The gold leaf is very thin and it deforms or tears easily, so handle it with care. Make sure not to touch it with your hands because you do not want oil or grease from your fingers to transfer to the gold leaf.
Additionally, you'll need: a torch, pickle solution, some sterling silver to work on, a hot plate, a polished steel or agate burnisher and some tweezers.
You'll be working with hot metal, so use appropriate heat-resistant tools, keep flammable materials away and make sure your workspace is well ventilated.
Sterling silver is an alloy. It exists of 92.5% pure silver (that explains the .925 stamp) to which 7.5% other metals ar added to strengthen the silver. Usually this added metal is copper. Copper can oxidise when heated and interfere with the bonding process. The gold needs a clean and oxide free surface to bond properly.
You can prepare your sterling silver by creating a thin, pure silver layer on its surface. This process is called depletion gilding. You do so by annealing, quenching and pickling your sterling silver several times. This brings the fine silver embedded in the sterling silver towards the surface. When you’re left with an even, matte white finish, you have the result you’re looking for.
If your silver is properly prepared, turn on your hot plate. It provides steady heat and will keep the silver up to the correct temperature. Keum-Boo is usually recommended at temperatures around 350 to 450 degrees Celsius. My hot plate doesn't come with a thermometer. I check the temperature with a wooden dowel. I place a wooden dowel directly on the hot plate. If it chars a bit, it has the correct temperature. Place your piece on the hot plate and allow it to heat evenly.
Once your silver has reached the correct temperature, carefully place your piece of gold onto the surface. Some people can even cut the gold leaf in certain shapes before adding it. If you're one of those people, I salute you. I am not one of you. Use a clean, polished burnisher, to gently press the gold against the hot silver. Start by securing a small section, then gradually work your way across the rest of the gold. Apply firm pressure to make sure the gold comes into contact with the silver underneath. You can even add several layers. You'll notice that the gold begins to grab onto the surface. That is where the bonding process takes place.
Gold and silver can form a metallic bond without melting. When heated and pressed together, atoms from the two metals begin to move between their surfaces. The gold becomes bonded to the silver rather than simply sitting on top of it.
A few things to watch out for
Check the gold carefully, especially around the edges. If any sections appear loose, you can reheat the piece and burnish again. Keep in mind that the gold layer is thin, so go easy with polishing on the gilded areas. A light burnish brings out a lovely warm shine, and you can add a patina to the silver around the gold to make the contrast really pop. Test your finishing method on a scrap piece first if you're unsure about your plan.
The gold won't stick. What am I doing wrong?
Your silver may not be hot enough, the surface may be contaminated or your sterling silver may need further depletion gilding. Check these things before trying again.
My gold leaf keeps tearing before I even place it.
Welcome to my world. Very thin gold leaf is particularly fragile. Try working with smaller pieces and avoid dragging your burnisher across areas that haven't bonded yet.
How do I know the gold has actually bonded?
You'll feel it grab under the burnisher and it won't lift when you rub it. After cooling, loose flakes brush away while the bonded gold stays firmly in place.
Keum-Boo rewards calm, steady hands more than speed. Your first few pieces might not be perfect, and that's completely fine. Every goldsmith learns this technique by feel. Take your time, work on some test pieces, and enjoy watching that warm gold bond to your silver. Once it clicks, you'll want to add a little gold to everything.
Reading about Keum-Boo is one thing, but seeing how the gold reacts to heat and pressure makes it much easier to understand. Click the link below and you'll go straight to my Patreon channel.